Sales and Supply of Insulation Materials
Are you a contractor sourcing for insulation materials? Then visit or contact us for your entire insulation material requirement. We are major representative for a wide range of Insulation material manufacturing companies local and international
ROCKWOOL Insulation Materials
Rockwool is also known as mineral wool, slag wool, or stone wool. It is a mixture of rock, sand, and other raw materials created through a spinning process in a high temperature which is then formed to different specifications. Rockwool is used in a wide range of insulation purposes.
ROCKWOOL Specification
ROCKWOOL Wire Mat
|
Thickness in mm |
Length in mm |
Width in mm |
Packaging m²/roll |
|
30 |
8000 |
1000 |
8 |
|
40 |
6000 |
1000 |
6 |
|
50 |
5000 |
1000 |
5 |
|
60 |
4000 |
500/1000 |
4 |
|
75 |
4000 |
500/1000 |
4 |
|
80 |
3000 |
500/1000 |
3/1.5 |
|
100 |
3000 |
500/1000 |
3/1.5 |
|
120 |
30000 |
500/1000 |
3/1.5 |
The following ROCKWOOL specifications materials are available
- Rockwool 169SW: Stainless steel and stitching wire.
- Rockwool 160S: Galvanized steel mesh and stainless steel wire.
- Rockwool 160ALU: Galvanized steel mesh and stitching wire with addition of aluminum foil between mesh and rockwool.
- Rockwool 160 SW ALU: Stainless steel mesh and stitching wire with addition of aluminum foil between mesh and rockwool.
- Rockwool insulation and pipe section with tubes for cold insulation.
Application
Rockwool 160 is a lightly bonded rock wool mat stitched on galvanized wired mesh with galvanized wire. The wired mat is suitable for thermal and acoustic insulation of industrial pipe work, boiler walls, furnaces and industrial smoke exhaust ducts.
Advantages
- Excellent thermal and acoustic insulation.
- Suitable for use over irregular surfaces.
- Available in a wide range of thicknesses up to 120 mm.
- Suitable for use over stainless steel
- Maximum service temperature 600°c (1112°F) 750°c (1382°F)
FIBERGLASS Insulation Material
High quality fiberglass slaps roll and pipe section for thermal acoustic insulation, its suitable for residential, office complex and industries also fiberglass duct insulation, duct warp duct board for central air conditions and blanket equipment.
Foam Insulation
Foam insulation is applied as a liquid which contains a polymer such as polyurethane and foaming agent and it’s sprayed through a nozzle into a casing, prefabricated different sizes of pipe to be insulated or the cavity wall where it will spread to fill all the nook and cranny.
It is very suitable for chilled water pipe and other building insulation. Also puff insulation is use in cold room sector. Its very efficient material for cold insulation it will serve same purpose as foam insulation for ceiling, panel, cavity, wall, pipe section, chilled water line, studio and noise control.
Other Insulation Materials
LINACOUSTIC Flexible Duct Liner
Specifically designed as liner for sheet metal ducts n air conditioning, heating, and ventilating systems. It offers outstanding durability in exposure to air velocity and superior acoustical and thermal performance in systems operating at velocities up to 5000 RPM and temperature up to 250°f
AEROTUBE Insulation
Used to retard heat gain and prevent condensation or frost formation on cold plumbing, chilled water refrigerator or air conditioning lines. Recommended in applications from -40°f to +220°f
